Aei Dk 9830 Change Password Jun 2026

To assign or change a 4-digit entry password for a user, follow this process:

* -> 0000 -> # -> 01 -> [New Code] -> # -> * Step 2: How to Change or Add a User Password (PIN)

The * (asterisk) and # (hash) keys are used to clear mistakes, enter programming mode, or confirm data entry. Step 1: How to Change the Master Code

: Key in the current Master Code (e.g., 0000 ) and press the * (star) key. The amber LED will turn on, indicating you are in programming mode. aei dk 9830 change password

If you need to change a standard user's password (not the admin), the process differs slightly:

If the keypad does not behave as expected during this process, check the following common issues: The Keypad Emits a Long Error Beep

[Master Code] + [*] + [User Slot Number] + [New User PIN] + [#] + [*] Part 3: How to Delete a User PIN Code To assign or change a 4-digit entry password

Based on the model number , you are likely using a DK-9830 Fingerprint Time Attendance Terminal (often manufactured by ZKTeco or rebranded under AEI). These devices are commonly used for employee clock-in/clock-out systems.

You took too long between keypresses, or the current code you entered in Step 1 was incorrect.

The following instructions assume you have a standard factory configuration. The display interface is typically numeric with four to six menu keys. Follow each step carefully. If you need to change a standard user's

The status LED will flash or change color (typically turning amber or flashing slowly), indicating the device is ready for programming commands. Step 2: How to Change the Master Code

: If you have never changed it, the factory default Master Code is often 0 0 0 0 .