Keep the button held down, and completely release the Stop/Reset button.
This is the most common error. It means the software cannot communicate with the printer firmware.
Below is a comprehensive guide to understanding, using, and troubleshooting this specific version of the software. Key Functions of Canon Service Tool v1074 canon service tool v1074 updated
| Alternative | Best For | Cost | |----------------------------------|-----------------------------------------------|-----------------| | Canon IJ Printer Assistant Tool | Official waste ink level check (no reset) | Free | | WIC Reset Utility | Paid reset utility for many Canon models | ~$10 per reset | | Authorized Canon Service Center | Full EEPROM reset and maintenance | $50–$150 | | Replace waste ink pads manually | DIY fix; reset counter afterwards (needs tool)| ~$20 for pads |
Reads, dumps, and writes data to diagnose deep-seated firmware or hardware issues. Keep the button held down, and completely release
Blanks out the main and platen waste ink absorber counters.
Disconnect all other USB devices (like scanners or other printers) to avoid sending commands to the wrong hardware. Below is a comprehensive guide to understanding, using,
Press the printer’s physical button to turn the machine off. This saves the new data to the logic board.
Version 1.074 introduced a key change: the function to reset the EEPROM (and the serial number data) was deleted. While this removed the ability to perform a full factory reset of these settings, this change was likely made to prevent improper use of the tool.
Next, look at the section below it, ensure the Value is set to 0% , and click Set .