Rotate the thermostatic handle to set your preferred water temperature. It is factory-set with a safety limit to provide anti-scald protection , typically between 35∘C35 raised to the composed with power C and 40∘C40 raised to the composed with power C .

The display glitched, then resolved into three pictograms:

Clean the inlet filters. Caravans frequently suffer from sediment buildup from campsite water feeds. Disconnect the valve and flush the mesh filters positioned on the hot and cold inlets.

This complete installation, operation, and winterization guide ensures consistent water temperature and protects your plumbing system. Technical Specifications

The valve will automatically stop rotating at 38°C to protect children and vulnerable users from accidental scalding.

When you turn the shower off, the hot water in the pipes cools down. Upon turning it on again, this cooled water is the first to come out before the new hot water reaches the valve. This can be a quirk of thermostatic mixers and can be remedied by ensuring the unit is installed close to the hot water source and keeping the flow on a low setting when not in use.

It is critical to drain the unit during winter. Frozen water can expand and damage the internal thermostatic valve or pipework. Easy Disconnection:

use abrasive powders, bleach, or industrial chemical cleaners, as they will permanently strip the protective chrome plating. Cleaning the Inlet Filters

If the temperature becomes inconsistent, you may need to replace the thermostatic cartridge (92mm length, 31.45mm diameter) which is held in place by a screw-in thread. Installation Specifications Caraflo V200 Shower Mixer Tap Thermostatic Chrome

Slide the chrome backplates over the tails. Seat the rubber sealing washers inside the union nuts of the main mixer body to protect against leaks.

The is a thermostatic mixer shower designed for built-in or exposed valve installations . It maintains stable water temperature even when other taps are used, preventing scalding or sudden cold shocks.

: The mixed water temperature can be adjusted from cold to a preset top limit (typically 35°C to 40°C).