TEYU S&A CWFL-6000 Laser Chiller Manual: A Comprehensive Guide The TEYU S&A Go to product viewer dialog for this item.
If you’re searching for the operation or maintenance manual for the (commonly the S&A chiller unit for a 6kW fiber laser), here’s a quick heads-up.
A significant portion of the manual is dedicated to the T-507 temperature controller. The CWFL-6000 offers two primary modes: and Intelligent Mode . In Intelligent Mode, the chiller automatically adjusts the water temperature based on the ambient environment, which minimizes the risk of condensation on sensitive laser components. The manual provides step-by-step instructions for navigating the controller interface to set alarm thresholds, ensuring the user can customize the cooling parameters to match specific industrial workloads. Alarm Systems and Maintenance cwfl-6000 manual
Integrated alarms include compressor time-delay, overcurrent, and water flow, protecting both the chiller and the laser. 2. Installation Guide (From CWFL-6000 Manual)
High-pressure vertical centrifugal pump (typically 1.1kW to 1.5kW) Water Tank Capacity: ~40 Liters Refrigerant: R-410a (Eco-friendly) Weight: ~130 kg to 160 kg (empty) Installation Environment Requirements TEYU S&A CWFL-6000 Laser Chiller Manual: A Comprehensive
If operating in temperatures below 0°C, you must add a laser-safe antifreeze (like ethylene glycol). Warning: Always drain and flush the system once the weather warms up, as antifreeze can be corrosive over long periods. 5. Troubleshooting Common Alarms
Regularly check the Y-strainer (water filter) for debris, particularly if water flow decreases. 5. Troubleshooting Common Issues Check for bent or blocked water pipes. Ensure the water level is sufficient. Clean the Y-strainer. High Water Temperature Alarm (E03/E04): Ensure the chiller has enough ventilation. Clean the dust gauze and condenser. Check if the ambient temperature is too high. Controller Not Displaying: Check the main power source and fuse. Conclusion The CWFL-6000 offers two primary modes: and Intelligent Mode
Main water loop sensor malfunction. Inspect connection or replace sensor. Water flow alarm
Cooling failure. Clean dust filters, check refrigerant levels, or reduce laser load. Ultra-low water temperature
The TEYU CWFL-6000 Chiller relies on a dual independent cooling circuit. A low-temperature loop continuously conditions the main fiber laser source, while a high-temperature loop protects the optics and processing head. Manufacturer Specification Up to 14kW+ (Depending on ambient/fluid settings) Temperature Stability Standard Power Supply 380V AC, 3-Phase, 50/60Hz Pump Motor Power Internal Tank Volume Default Refrigerant Water Port Dimensions Rp1/2 + Rp1 Net Equipment Weight First-Time Unpacking & Operational Setup
The TEYU S&A is designed with a dual-temperature circuit, making it an ideal cooling solution for fiber lasers and their optics simultaneously.