Dell D220p 01 Power Supply Pinout 2

to power external desktop graphics cards via PCIe risers. Custom adapter kits allow you to map the DA-2 connector directly over to standard 6-pin or 8-pin PCIe graphics power plugs. When doing this, ensure your PCIe splitters strictly map the yellow 12V lines to pins 6, 7, and 8, and the black ground lines to pins 2, 3, and 4. Keep the remote lines isolated to prevent frying the graphics card logic board. 3. Custom LED and Display Drivers

Inside the cable, you will typically find 3x thick white wires, 3x thick black wires, one thin blue wire, and a braided shield. Positive (+12V): Connect all white wires together. Ground (GND): Connect all black wires together.

The Dell D220P-01 power supply has a standard ATX pinout configuration, with some modifications. The pinout is as follows: Dell D220p 01 Power Supply Pinout 2

4.20mm pitch proprietary 8-pin dual-row male plug Complete Dell D220P-01 8-Pin Pinout Guide

⚠️ Double-check with a multimeter before powering any non‑Dell device. Modifying PSUs carries shock and fire risk. to power external desktop graphics cards via PCIe risers

The specifications of designed for industrial or consumer electronics like 3D printers.

The Dell D220P-01 is a highly sought-after external power brick, originally designed for the Dell OptiPlex SX280 and GX620 ultra-small form factor PCs. Because it delivers a substantial 220 watts of power at 12V, it has become a staple for hobbyists looking to power radio equipment, LED strips, or DIY electronics. Keep the remote lines isolated to prevent frying

| Pin | Dell D220P-01 | Standard P4 | |-----|---------------|--------------| | 1 | GND | GND | | 2 | GND | GND | | 3 | +12V1 | +12V | | 4 | +12V2 | +12V |

This pinout is best understood visually. Looking at the on the power supply (or the male connector on your adapter cable), the pins are arranged as follows:

: Tie the Blue wire directly to a Black ground wire .