. It allows administrators to perform initial setup, manage print queues, and update firmware across a local network. Key Features and Capabilities Automatic Discovery
If you are looking to manage your D-Link PS Admin software or are trying to locate a saved draft post on LinkedIn
Set the Queue Name. Default D-Link queue names are usually PS-XXXXXX-P1 (where XXXXXX represents the last 6 digits of the MAC address). Ensure LPR Byte Counting Enabled is checked. dlink ps admin
In the field, type the exact port name found inside PS Admin (e.g., lp1 ).
PS Admin often relies on the IPX/SPX protocol to discover devices before they have an IP address assigned. If the utility cannot find your print server, ensure this protocol is installed in your Windows network settings. Default D-Link queue names are usually PS-XXXXXX-P1 (where
: Configures support for TCP/IP, NetBEUI, AppleTalk, and Novell NetWare (NDS/Bindery).
Open PS Admin, select the print server, and click the Upgrade button in the toolbar. Select File: Browse for the downloaded .bin firmware file. PS Admin often relies on the IPX/SPX protocol
Type the assigned IP address of the print server into the address bar (e.g., http://192.168.1.250 ) and press Enter. A login prompt will appear. admin Default Password: Leave this blank (or use admin ).
Yes, many models support multiple printers. For instance, devices like the DP-300 have two parallel ports (LPT1, LPT2), and the DP-301U has a single USB port. Each port will have its own unique name (e.g., LPT1, LPT2, USB1) and can be configured independently.
Let me know if you need access to the PS admin console or logs.
To make your device easily identifiable, you should change the Server Name. In PS Admin, navigate to the menu (or Configuration > Server Device ). Here you can assign a descriptive name, such as "Office_HP_LaserJet" or "Accounting_Printer", as well as fill in the Location and Contact fields for administrative tracking. After making changes, you must Save Configuration for them to take effect.