Excelvan Barcode Scanner User Manual Extra Quality Best < VALIDATED × 2026 >

| Parameter | Value | |-----------|-------| | Sensor | CCD or Laser (model dependent) | | Resolution | ≥ 4 mil (1D) / ≥ 6.6 mil (2D) | | Scan rate | 200–300 scans/sec | | Interface | USB‑A, RS232 | | Input voltage | 5V DC ±5% | | Current | < 150 mA (standby), < 300 mA (scanning) | | Cable length | 1.5 m | | IP rating | IP42 (splash resistant) |

By default, Excelvan scanners simulate a standard keyboard entry followed by an command. You can customize this behavior to automate data entry in complex warehouse software. Adding a Suffix or Prefix

Open a text editor (like Notepad, Word, or Excel) and scan a test barcode. The data should appear instantly where your cursor is blinking. 2.4GHz Wireless Connection (For Wireless Models) excelvan barcode scanner user manual extra quality

For most operating systems (Windows, macOS, Linux), Excelvan scanners are plug-and-play and will work immediately upon connection. Drivers typically install automatically.

Configuration barcodes change the internal settings of the scanner. Scan these codes directly from the manual to apply settings. Interface Mode Selection Emulates a standard keyboard entry. | Parameter | Value | |-----------|-------| | Sensor

Auto-Induction: The scanner "wakes up" only when it senses motion in front of the lens. Extra Quality Customization: Suffixes and Prefixes

Plug the included 2.4GHz USB wireless dongle into an active USB port on your computer. Turn on the scanner by pressing the trigger. The data should appear instantly where your cursor

If your spreadsheet or software requires a different action after a scan, configure your terminator settings:

For "extra quality" performance, some Excelvan manuals allow for "Character Stripping." This lets you ignore the first few digits of a barcode (like a manufacturer prefix) and only input the unique item ID. This requires a specific sequence: Scan "Enter Setup" -> "Strip Leading Digit" -> "Exit and Save."