Hpe Smart Array S100i Sr Gen10 Sw Raid Driver For Windows Server 2022 ((install)) Info

If you need help resolving a specific error during setup, please tell me you are using, your chosen RAID level , and the exact error message you see. Share public link

When you reach the screen asking "Where do you want to install Windows?", your drives will likely not appear.

Select the partition and click to proceed with the OS installation standardly. Updating Drivers Post-Installation If you need help resolving a specific error

The HPE Smart Array S100i SR Gen10 is an embedded software RAID controller (SW RAID) built into the chipset of HPE ProLiant Gen10 servers. It is designed specifically for SATA drives (hard drives and SSDs) and provides foundational RAID capabilities, including RAID 0, 1, 5, and 10.

If you are installing Windows Server 2022 onto a drive managed by the S100i, follow these steps: Updating Drivers Post-Installation The HPE Smart Array S100i

You must first create your RAID array (RAID 0, 1, 5, or 10) in the UEFI System Utilities (F9) or HPE Smart Storage Administrator (F10) before starting the OS installation.

Install HPE SSA CLI or GUI:

Download the driver and run the .exe on a separate PC to the files to a USB drive.

The server hardware framework automatically sources all necessary embedded controller drivers, including the S100i storage package, directly into the deployment process without external USB steps. Troubleshooting Common Deployment Failures Symptom / Error Probable Root Cause Corrective Action Install HPE SSA CLI or GUI: Download the

Outdated system ROM platform firmware conflicts with new OS driver versions.

Download the file, which usually presents itself as an .exe file (e.g., cp0XXXXX.exe ). Extracting the Driver File