Menu
when the radio is connected? What specific error message are you seeing? TC-320 Business Two-way Radio - HYT - Hytera
To avoid data corruption, always follow this specific connection sequence: Turn the HYT TC-320 radio. Plug the programming cable into the computer's USB port. Plug the mini-USB end into the radio's side port.
Look under . If you see a yellow warning triangle, right-click and update the driver. Note the assigned COM Port number (e.g., COM3). Step 2: Install the HYT CPS Extract the downloaded HYT TC-320 software zip folder. Run setup.exe as an Administrator. Follow the on-screen prompts to complete installation. Launch the application. Connecting the Radio to the PC
Always the radio before making changes. Click the "Read from Radio" icon. hyt tc-320 programming software
The software allows technicians to customize several operational parameters:
This is usually a driver issue or the wrong COM port selection. Re-check the Device Manager.
Customize the short-press and long-press actions of the side buttons (e.g., Monitor on/off, Battery indicator, Squelch adjustment). when the radio is connected
configuration files (codeplugs), making it easy to "clone" settings across multiple radios for consistency. Atlantic Radio Communications Corp. Do you also need the specific driver latest version of the software to get started? Hytera TC320 Customer Programming Software & Firmware
With the software open and your radio connected, you can now configure your TC-320. The interface, while basic, is logically structured for managing professional communications.
Turn the radio off, disconnect it, reconnect securely, turn it on, and try reading again. Ensure the cable is pushed entirely into the radio port. "Frequency Out of Range" Plug the programming cable into the computer's USB port
Turn the radio volume knob clockwise to power the unit . Ensure the battery has a healthy charge before proceeding. 4. Navigating the Programming Software
In the software menu, click on Setup > Communication Port . Select the COM port number that matches your cable in the Device Manager.
Turn off the radio, unplug the cable, and turn the radio back on to test your new settings. 4. Troubleshooting Common Connection Issues
Before making any changes, you must read the existing data from your radio to your PC. In the software menu, look for an option like Read or Read from Radio . This action will load the current channel frequencies, signaling settings, and features into the software. During this process, the radio's status indicator should glow red or green.
Click the icon (a PC icon pointing to a radio) or go to Program > Write to Radio .