Kincaid Radio Controlled Clock Instruction Manual

If your clock is not setting correctly, consider these factors:

The clock has successfully received the signal, but your Time Zone setting is incorrect. Refer to Section 3 to adjust the zone indicator (PST, MST, CST, EST).

Insert a pin or paperclip into the RESET hole on the back, or press the REC button. The clock will reset to 12:00 and restart the signal search. If you want to fine-tune your setup, tell me: Is your Kincaid clock digital (LCD) or analog (with hands) ? What specific problem are you experiencing with it? Do you know the model number listed on the back? kincaid radio controlled clock instruction manual

: Keep the clock at least 6 feet (2 meters) away from electronic appliances like TVs, computers, or microwaves that may disrupt the radio signal.

Locate the Time Zone button (P, M, C, E) and change it to your correct local zone. The clock will automatically adjust to the correct hour. If your clock is not setting correctly, consider

Follow these exact steps to initiate your Kincaid clock for the first time. Step 1: Battery Installation

The hands will start moving. Release the button when they near the correct time, then tap the button repeatedly to micro-adjust minute by minute. The clock will reset to 12:00 and restart the signal search

The signal is strongest between 12:00 AM and 4:00 AM . If your clock fails to sync during the day, leave it alone overnight. It will correct itself by morning.

| | Solution | |---|---| | Poor signal location | Move clock to a different room near an exterior north-facing window | | Local interference | Unplug all electronics within 3 feet of the clock | | Wrong time zone setting | Check the P/M/C/E switch on the back | | You live too far from Colorado | Manual sync may only work 75% of the time in coastal areas. Try a forced sync at 2:00 AM. |

Within 6 feet of televisions, computers, microwave ovens, or router equipment. Near heavy power lines.

Most Kincaid atomic clocks are designed to set themselves once a battery is inserted.