: Push the inner electronics tray straight back into the secured outer mounting sleeve until flush.
Once the package is downloaded, verify its integrity using the provided checksum. This step ensures that the package has not been tampered with during transmission.
Secure the back box to structural studs using heavy-duty wood screws or toggle bolts if anchoring to concrete blocks.
Maintains a detailed history of unit activity, including who released the key and when. Built with 1/4" structural steel knox keysecure 3b installation manual hot
Before beginning the installation, it is critical to understand the device’s technical requirements and capabilities to ensure a safe and effective setup.
To begin installation, you must use a Tech Key and a specialized tamper-proof security hex wrench to remove the technician lock cover and open the unit.
and a tamper-proof security hex wrench for opening and repair purposes. Electrical Connection: : Push the inner electronics tray straight back
: Confirm the software accurately logs any standalone faceplate removal events, which record automatically even if vehicle power was cut.
Inspect the slot for obstruction. Clean with compressed air. Do not lubricate. Out-of-sync database
Are you mounting this in a ?
[ KEYSECURE 3B REAR TERMINAL PLUG ] +-----------------------------------------------+ | [RED] | [BLK] | [WHT] | [BLU] | [GRN] | | +12/24V | Ground | Ignition | Relay | Relay | | Battery | (Chassis| Sense | N.O. | Common | +-----------------------------------------------+ Pinout Configuration
This is a critical safety note for those working with live power:
: Use the back of the housing as a template to mark and drill your mounting holes. Secure the back box to structural studs using
To install: