Onkyo Rc-799m Remote Manual

In this post, I’ll cover everything the official manual includes: button functions, programming codes for your TV/Blu-ray player, battery replacement, and common troubleshooting tips.

To use the RC-799M with other devices, you must assign the correct 5-digit manufacturer code to the corresponding REMOTE MODE Enter Program Mode : Press and hold the desired REMOTE MODE

Press and hold the device button at the top of the remote.

If your Onkyo receiver supports multi-room audio, use the following sequence to control secondary zones: Press the (or ZONE 3 ) button on the remote. Press the POWER button to turn on the secondary zone. onkyo rc-799m remote manual

By understanding the simple IR mechanics and the basic button layout of the RC-799M, you can fully restore control over your Onkyo AV experience, whether you are adjusting the volume from across the room or navigating through the menu of your favorite streaming device.

Press the desired button (e.g., NET, TV/CD) within 8 seconds to change the source for that room only.

Press the RECEIVER button first to ensure the remote is sending commands to the amplifier and not the TV. In this post, I’ll cover everything the official

Ensure nothing blocks the dark plastic lens on top of the remote or the front panel of the receiver. Energy-efficient light bulbs (CFLs) or direct sunlight hitting the receiver sensor can occasionally jam IR signals.

The RC-799M requires two (2) AA alkaline batteries . Note that many replacement models advise against using rechargeable batteries for optimal performance.

Once batteries are inserted, the remote is typically ready for use with your Onkyo receiver. It does not require a lengthy setup or programming sequence. Press the POWER button to turn on the secondary zone

Press and hold down the DISPLAY button and the desired REMOTE MODE button (such as TV or BD/DVD) simultaneously for about 3 seconds.

Depending on your specific Onkyo receiver model, you may be able to control secondary devices. Some Onkyo receivers allow you to "pass through" remote commands via a feature called RIHD (Remote Interactive over HDMI).

The RC-799M stands out due to its ability to control multi-zone audio systems directly from the palm of your hand. Operating Zone 2 and Zone 3