nPLAYER
Select the correct number that you noted from Device Manager.
After a successful reboot, perform these final steps to get back to the field:
Check the menu to verify that the firmware date and software version match the file you just installed.
Note that or play a connection chime when the powered-down unit is attached; this lack of initial detection is entirely normal. 2. Prepare the Software Loader satlink ws6906 software upgrade
Some newer versions of the WS-6906 allow for a direct USB stick upgrade:
. If using a modern PC, you will likely need an RS-232 to USB adapter. Initiate Tool : Run the updater software as an Administrator . Select the file in the browser window. The "Handshake"
Follow these steps precisely to update your satellite finder. Do not disconnect any cables during the transfer process. Step 1: Connect the Hardware Select the correct number that you noted from Device Manager
Incorrect baud rate setting or faulty USB-to-Serial adapter chipset.
Select the exact COM port number noted from Device Manager.
Crucial: Do not touch the cable or power off the unit while the progress bar runs. Initiate Tool : Run the updater software as an Administrator
A: Yes, but not always. Some later bootloaders prevent downgrading. If allowed, follow the same process with the older .bin file.
: This process is derived from user guides created around 2013. Many users report that this method simply no longer works on modern Windows 10 or 11 PCs due to driver incompatibilities and the scarcity of functional RS-232 ports. If the software stalls at "checking serial port" indefinitely, you have encountered this compatibility wall.
: If possible, use the "Read parameters" function in the tool to save your current configuration to your computer before applying any updates. Satlink WS-6906 Software Upgrade Guide | PDF - Scribd
The computer software should immediately recognize the device, change status, and display a progress bar indicating data transfer.
