: Raise the carriage slightly to clear the safety wedges, disengage the mechanical manual latches, and depress the lowering lever to bleed fluid back into the reservoir or reverse the drive safely. 5. Maintenance and Troubleshooting Schedules
The Tecalemit Hoist V15100 is a high-quality, versatile hoist designed for a wide range of lifting applications. With a lifting capacity of up to 1000 kg (2204 lbs), this hoist is perfect for heavy-duty lifting tasks, such as lifting engines, machinery, and other heavy equipment. Its robust design and construction ensure reliable performance, even in demanding environments.
Bleed air from the cylinder bleed screws; adjust cable nuts to equalize tension.
The hoist must be mounted on a solid concrete surface, typically 3000 PSI or higher. tecalemit hoist v15100 manual
Raise the hoist slightly to take weight off the locks before pulling the release. Lowering valve clogged Inspect, clean, or replace the lowering solenoid/valve. 6. Safety Compliance and Regulatory Inspections
Raise the vehicle to the desired working height.
Improper anchoring is the leading cause of structural hoist failure. Ensure your workshop bay meets the concrete foundation guidelines before drilling. Concrete Foundation Minimums : Raise the carriage slightly to clear the
to level the base. Ensuring the posts are perfectly vertical and the concrete slab is level is critical for preventing premature wear on the lifting screws. Maintenance:
Check compressor pressure (min 6 bar); inspect and lubricate safety latch links.
Connect the hydraulic power unit, fill with the recommended hydraulic oil (usually ISO 32 or 46), and ensure 3-phase or single-phase power is installed correctly. 3. Safe Operating Instructions With a lifting capacity of up to 1000
Disengage the safety locks (via the manual lever, pneumatic switch, or automatic electronic button).
: Ensure all moving parts and pulleys with self-lubricating bushes are clear of debris. 3. Support and Manual Retrieval