Reset — Traice Dvr Password

If none of the above work, you may need an authorized reset file (often an XML or GUID file).

Embedded DVRs use an internal clock to maintain system time. Removing power from the real-time clock chip can force the system time back to a historical default (such as 01/01/2000), which allows you to use a static, date-calculated master password. Step-by-Step Battery Reset:

Go straight to Main Menu > System > Account and configure your security questions and recovery email address.

Hold the short for until you hear a prolonged beep or see a loading screen.

This technique focuses specifically on clearing the password. traice dvr password reset

[ Motherboard Circuitry ] o---o <-- Jumper / TP Pins (e.g., J1, J2, RESET) [镊子 / Screwdriver Tip] How to Reset DVR to Factory Default without Password?

If the DVR generates a "Serial Number" or "MAC Address" on the login error screen, contact Traice support directly.

Is your DVR currently or completely offline?

Power off the DVR and open the casing. Look for a small tactile button on the motherboard. Press and hold it while plugging the power back in; continue holding for 10–30 seconds until you hear a beep. If none of the above work, you may

If you are currently facing a lockout with a Traice or similar DVR, these are the most reliable methods:

Note: Passwords are case-sensitive. Ensure your Caps Lock key is turned off before entering these codes. 2. Utilize the Guided On-Screen Reset Interface

Do you see a or a QR code on your login screen?

Use a DVR Super Password Calculator or mobile app like to generate a code for that specific date. Step-by-Step Battery Reset: Go straight to Main Menu

Before you start the password reset process, make sure you have the following:

Many Traice/TVT models allow a "Super Password" generated based on the date shown on the DVR screen. Common Default Passwords Master Password

On newer models, clicking the "Forgot Password" icon will display a QR code. Scan this using the manufacturer's mobile app (like XMeye or DMSS ) to receive a reset code via your registered email. 4. Technical Support Recovery

: Unplug the power and remove the round silver battery (CR2032) from the motherboard for at least 3 minutes. This often reverts the system date to a factory default (e.g., 2000-01-01), which allows you to use a known default password for that specific date. Summary of Common Default Credentials Brand/Firmware Default Username Default Password Traice / XMeye admin (blank) or 123456 Dahua OEM admin admin Hikvision OEM admin 12345 or password

If there is no external reset button, you may need to access the internal motherboard. This may void your warranty. Open the Casing: Unscrew the outer shell of the DVR.